• Kirjes sanding cylinder Ø20mm

Kirjes inflatable sander for sanding and polishing of uneven surfaces.

Kirjes Inflatable Sanders are pumped up through an air inlet in the drive shaft located in the bottom of each sander.  The air valve design leaves the bottom flat without a clumsy protruding valve on the sanders. This patented solution made it possible to make superior cylindrical drum sanders as well as a unique rounded sander with a dome shape at the working end.  This molded rubber bulb constantly flexes and changes shape, making the sanders soft all the way to the edge.  With the choice of four grits from course to extra fine, Kirjes eliminates scratches and allows you to apply the sander’s total width against the work piece or to use only the edge in all kinds of complex sanding.  The sander actually becomes flat when pressed against a flat surface and round when pressed against a round surface i.e.  the sanders conform to the underlying surface. Consequently the sanders should be filled with very little air (the half sphere sander, needs to be pumped slightly harder than the drum sander to hold the sandpaper).

Kirjes inflatable sanders
Shape cylinder
Diameter Ø20 mm
Length 32 mm

Write a review

Please login or register to review

Kirjes sanding cylinder Ø20mm

  • Brand: Plano
  • Product Code: PLA KJ120
  • Availability: Please ask about delivery
  • 25.21 €

  • Ex Tax: 20.66 €

Related Products

In Stock
Sanding sleeves for cyclinder KJ120 (3 pcs)

Sanding sleeves for cyclinder KJ120 (3 pcs)

Every sanding sleeve is made to specifically fit each inflatable sander. The sanding cloth material ..

3.60 € Ex Tax: 2.95 €

In Stock
Kirjes sanding & polishing motor

Kirjes sanding & polishing motor

Kirjes small and portable, extremely quiet but powerful sanding and polishing motor is optimized for..

138.99 € Ex Tax: 113.93 €

In Stock
Kirjes flexible shaft

Kirjes flexible shaft

I recommend sanding with Kirjes flexible shaft since you can clearly see your progress whilst the sa..

90.00 € Ex Tax: 73.77 €

In Stock
Air pump for Kirjes sanding airdrums

Air pump for Kirjes sanding airdrums

To fill up air pressure in Kirjes air drums and half spheres...

6.91 € Ex Tax: 5.66 €

In Stock
Polishing Brush Sleeves for cylinder Ø20 (2 pcs)
In Stock
Polishing cloth Sleeve for cylinder Ø20 (2 pcs)
Rubber for cylinder Ø20mm

Rubber for cylinder Ø20mm

Replacement rubber for Kirjes cylinder 20 mm...

7.91 € Ex Tax: 6.48 €



More info needed? Send me an e-mail at peter@tobi.si.