Termite hollowing tools

Termite hollowing tools from Gamma Zinken. Made in Italy. ... Continue
Členjena Termite palica 17/500

Členjena Termite palica 17/500

..

72.00 € Ex Tax: 59.02 €

Dleto za čelno vrtanje

Dleto za čelno vrtanje

..

43.30 € Ex Tax: 35.49 €

Nastavek z osnovnim krožnim vložkom

Nastavek z osnovnim krožnim vložkom

..

67.00 € Ex Tax: 54.92 €

Ravna Termite palica 17mm

Ravna Termite palica 17mm

..

79.00 € Ex Tax: 64.75 €

Termite 3898 vložek

Termite 3898 vložek

..

48.00 € Ex Tax: 39.34 €

Termite 4228 vložek

Termite 4228 vložek

..

52.00 € Ex Tax: 42.62 €

Termite 4243 vložek

Termite 4243 vložek

..

38.00 € Ex Tax: 31.15 €

Termite ročaj za 17mm palico

Termite ročaj za 17mm palico

600mm dolg aluminijasti ročaj z gumijastim oprijemom za 17mm Termite palice...

52.00 € Ex Tax: 42.62 €

Termite z lesenim ročajem za HM rezila

Termite z lesenim ročajem za HM rezila

..

78.00 € Ex Tax: 63.93 €

Termite-holder Insert for HM finishing scraper

Termite-holder Insert for HM finishing scraper

..

59.00 € Ex Tax: 48.36 €

Showing 1 to 11 of 11 (1 Pages)


Gamma Zinken Termite Hollowing Tools

This revolutionary line of hollowing tools has been created in order to satisfy the needs of execution rapidity and the quality of the work of modern woodturners.

These tools are conceived to be used from the centre outwards. The 40°÷45° cutting angle is the best to obtain an excellent finishing. It is possible to make

continuous straight movements through the workpiece or rotative movements to shape your object.


The termite hollowing tool is composed by a shaft that can be of Ø 14 or Ø 17 mm and a soft and comfortable anti-slip silicone coated handle, into which a termiteholder

shank is fitted. The shaft is made of steel and available in two models: straight and jointed; the second one is ideal for undercutting. The shank slides within the

handle in order to be extended or shortened.


The dimension of the shaft defines the depth of the excavation: we recommend the Ø 14 shaft for deep vases of 140mm having a protrusion over the tool-rest of

about 200 mm; the Ø 17 is recommended instead for 250mm vases, but if the vase has a large enough hole so that the tool holder can enter a little bit, nothing forbids

to make an excavation even deeper. The 14 mm shaft version is also available with a fixed wooden handle.